Integrity High Gloss Extended Wear Floor Finish-Off White, 30 Gal.

Integrity High Gloss Extended Wear Floor Finish-Off White, 30 Gal.

Item No.: 61185


Regular price:$672.06
Save 20%


  • Liquid High Gloss Extended Wear Floor Finish - Off White, Integrity 30 Gallon Drum
  • High Gloss, Extended Wear Floor Finish
  • Metal interlocked acrylic polymer finish. Brilliant, high gloss finish provides a durable long lasting shine. Self-sealing. Low maintenance. 18% solids.
  • An extremely durable medium solids formulation that offers buffable maintenance and restorability in a dry bright high-gloss finish.
  • Advantages
  • This easily applied, self-leveling formulation is highly resistant to heel and scuff marks. It is readily restored to the original high lustre by either recoating or buffing with a high-speed polisher.
  • Formulated with the toughest acrylic polymers, resins, and waxes, insuring a long-lasting transparent finish.
  • Use on vinyl, vinyl composition, vinyl asbestos, asphalt tile, and linoleum. Also use on sealed floors of wood, concrete, terrazzo, and the so-called no wax floors.
  • Directions
  • Read the entire label before using this product.
  • 1. Completely strip old floor finish using Re-Move Floor Finish Stripper.
  • 2. Remove stripping solution and rinse floor thoroughly (2 rinses recommended). Allow to dry.
  • 3. Using a clean applicator of choice, apply thin, uniform coat of Integrity Floor Finish. Allow each coat to dry thoroughly (normal conditions 20 to 30 minutes). 4 to 6 coats of finish are recommended.
  • 1. Dust mop or sweep floor.
  • 2. Damp mop or automatic scrub using Maintain Neutral pH Floor Cleaner.
  • 3. Traffic lanes may be recoated as necessary.
  • 4. Buff or burnish the floor as desired. The use of Luster Plus One Step Cleaner/Gloss Enhancer is recommended to condition the floor and extended the time between top scrub and recoating.
  • 1. Dust mop or sweep floor.
  • 2. Top scrub the floor using APC All Purpose Cleaner at a ratio of 1 to 20 (6 ounces/gallon). Use aggressive enough floor pad to remove the top layer of floor finish.
  • 3. Rinse the floor, making sure it is clean and free of residue. Apply 1 to 2 coats of Integrity Floor Finish as directed above.
  • Caution
  • Skin and eye irritant. May be harmful if swallowed. Keep out of reach of children.
  • Specifications
  • Physical Form: Opaque Liquid
  • Color: Off White
  • Scent: Slight Ammonia
  • Specific Gravity: 1.02
  • Density: 8.5 lbs. per gallon
  • pH As Is: 9.0 +- .3
  • pH2%: 11.3
  • Total Solids: 18%
  • Weight: 277.50 Pounds

  • Integrity Technical Data Sheet

  • Integrity Safety Data Sheet Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-