Floor Finish Green Time Liquid - Milky White, 4 Case

Floor Finish Green Time Liquid - Milky White, 4 Case

Item No.: 62312

$97.38

Regular price:$121.72
Save 20%

Description

  • Green Time Liquid Floor Finish - Milky White, 4 Case 35.50 Pounds
  • This is a premium environmentally preferred floor finish. Developed using highly advanced polymer technology, this acrylic co-polymer based finish has exceptional performance properties and can be maintained with conventional procedures.
  • Advantages
  • Environmentally Preferable
  • Deep gloss, extended wear formula
  • Exceptional clarity
  • Self sealing
  • Excellent leveling
  • Easy to maintain
  • Easy to restore
  • Environmental and Health Benefits
  • Zinc free, cross-linked polymers
  • Low VOC's (volatile organic compounds)
  • No formaldehyde
  • No ammonia
  • No alkyl phenol ethoxylate (APE)
  • Directions
  • Read the entire label before using this product.
  • INITIAL APPLICATION:
  • 1. Completely strip old floor finish using Green Time Floor Finish Stripper
  • 2. Remove stripping solution and rinse floor thoroughly (2 or 3 rinses recommended). Allow to dry.
  • 3. Using a clean applicator of choice, apply thin, uniform coat of Green Time Floor Finish. Allow each coat to dry thoroughly (normal conditions 30 to 40 minutes). 3 to 5 coats of finish are recommended.
  • ROUTINE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Damp mop or automatic scrub using Green Time Neutral Floor Cleaner.
  • 3. Green Time Floor Finish can be used as a Spray Buff solution when diluted 1 to 4 and as a mop on restorer when diluted 1 to 2.
  • 4. Traffic lanes may be recoated as necessary.
  • RESTORATIVE MAINTENANCE:
  • 1. Dust mop or sweep floor
  • 2. Top scrub the floor using Green Time All Purpose Cleaner/Degreaser at a ratio of 1 to 40 (3 ounces/gallon). Use aggressive enough floor pad to remove the top layer of floor finish.
  • 3. Rinse the floor, making sure it is clean and free of residue.
  • 4. Apply 1 to 2 coats of floor finish as directed above
  • PRODUCT DISPOSAL
  • Any disposal practices must be in compliance with federal, state, and local laws. Any questions regarding disposal should be directed to the proper government agency.
  • Caution
  • Keep out of reach of children.
  • Specifications
  • Physical Form: Liquid
  • Color: Milky White
  • Scent: Mild
  • Non-Volitile Solids (ASTM D2834): 20%
  • Slip Resistance (ASTM D2047): >0.50 COF
  • Recoatability (ASTM 3153): Good
  • Detergent Resistance (ASTM D3207): Very Good
  • Removability (ASTM D1792): Excellent
  • Freeze Thaw (ASTM D3209): Passes
  • Dry/Recoat Time: 30 minutes or Dry to touch
  • Coverage: 200-300 ft. per gallon
  • pH: 8.09 - 9.0
  • Weight: 35.50 Pounds

  • Floor Finish Safety Data Sheet

www.P65Warnings.ca.gov Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-