Stripper 105 Engine and Parts Cleaner - 25 Pound Box

Stripper 105 Engine and Parts Cleaner - 25 Pound Box

Item No.: 30307

$45.91

Regular price:$57.39
Save 20%

Description

  • Stripper 105 Engine and Parts Cleaner - 25 Pound Box
  • Removes dirt, grime, oil, and encrusted grease from steel and cast iron housings (transmission drive train), gear boxes, and engine blocks. Contains a rust inhibitor.
  • Directions
  • Mix 8 to 48 ounces of STRIPPER 105 per gallon of water. Raise temperature of cleaning tank to 190 F. Agitation of part in cleaning solution can be applied if desired (do not splash).
  • Dip dirty grime and oil encrusted steel and cast iron housings (transmission drive train), gear boxes, engine blocks in a hot solution of STRIPPER 105 and water. Allow for soaking, penetration, wetting. Raise part out of cleaning solution. Allow to drain. Rinse with water. Part is clean and ready to be moved to work bench for dismantling, disassembly.
  • Do not use on aluminum parts or any soft metal. If parts to be cleaned are aluminum, use STRIPPER 410
  • Spray Wash: Preheat water to 140 - 150F (60 - 66C). Circulate water and to 1 pounds of detergent per gallon of water 30 -125 g/Iiter). Raise temperature to 160 -180F (71 - 82C) to operate. Consult equipment manufacturer's instructions for proper operation. Rinse cleaned parts thoroughly with hot water.
  • Advantages
  • Solution is not flammable.
  • Contains no solvent.
  • Speeds repair work time by providing maximum cleaning.
  • Specifications
  • Physical Form - Powder
  • Color - White
  • Specific Gravity - 1.08
  • Density - 6.59 lbs. per cubic ft.
  • Active Alkalinity - 74.47%
  • DOT Classification - Corrosive (8)
  • Weight - 25.80 Pounds
  • Stripper 105 Technical Data Sheet
  • Stripper 105 Safety Data Sheet

www.P65Warnings.ca.gov Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-