Optimum Liquid Ultra High Speed Floor Finish - Off White, 5 Gallon Pail

• Liquid Ultra High Speed Floor Finish - Off White, Optimum 5 Gallon Pail
• Ultra High Speed Floor Finish
• High response formula. The professional choice for optimum gloss, durability and repairability. Designed to be used with high speed and ultra high speed buffing equipment. High maintenance. 20% solids.
• A high solid, high-speed buffable formulation that dries to a bright, high-gloss finish. Contains a concentrated blend of the latest materials available in floor finish chemistry. 20% solids.

Advantages

• This modern, high tech formulation levels smoothly, dries quickly, and repairs and maintains easily. The high solids content means fewer coats are necessary to maintain the original OPTIMUM shine.
• A combination of the finest materials available make it a nonslip, high gloss finish that is highly resistant to scuffing and black heel marks. To restore to the high gloss intensity, buff with a recommended high-speed burnishing pad.
• May be used on vinyl, vinyl composition, vinyl asbestos, asphalt tile, and linoleum. Also use on sealed floors of wood, concrete, terrazzo and the so-called no wax floors.

Directions

• INITIAL APPLICATION:
  • 1. Completely strip old floor finish using RE-MOVE Floor Finish Stripper.
  • 2. Remove stripping solution and rinse floor thoroughly (2 rinses recommended). Allow to dry.
  • 3. Using a clean applicator of choice, apply thin, uniform coat of OPTIMUM Floor Finish. Allow each coat to dry thoroughly (normal conditions 20 to 30 minutes). 4 to 6 coats of finish are recommended.
• ROUTINE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Damp mop or automatic scrub using Maintain Neutral pH Floor Cleaner.
  • 3. Traffic lanes may be recoated as necessary.
  • 4. Buff or burnish the floor as desired. The use of lustre plus One Step Cleaner/Gloss Enhancer is recommended to condition the floor and extended the time between top scrub and recoating.
• RESTORATIVE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Top scrub the floor using APC All Purpose Cleaner at a ratio of 1 to 20 (6 ounces/gallon). Use aggressive enough floor pad to remove the top layer of floor finish.
  • 3. Rinse the floor, making sure it is clean and free of residue. Apply 1 to 2 coats of OPTIMUM Floor Finish as directed above.

Caution

• May cause irritation to eyes. May be harmful if swallowed. Keep out of reach of children.

Specifications

• Physical Form: Opaque Liquid
• Color: Off White
• Scent: Slight Ammonia
• Specific Gravity: 1.02
• Density: 8.51 lbs. per gallon
• pH As Is: 9.0 +- .3
• Total Solids: 20%
• Weight: 45.80 Pounds

Optimum Liquid Ultra High Speed Floor Finish Technical Data Sheet

Optimum Liquid Ultra High Speed Floor Finish Safety Data Sheet

Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-