Results Liquid High Gloss Floor Finish - Off White, 4 Case

• Liquid High Gloss Floor Finish - Off White, Results 4 Case 37.5 Pounds
• High Gloss Floor Finish
• Metal interlocked acrylic polymer finish. Easy to apply and maintain. Will not powder or yellow. Self-sealing. Low maintenance. 16% solids.
• RESULTS is an all systems formulation that dries to a bright, high-gloss finish. Its combination of advanced acrylic polymers, resins, and wax guarantees easy application and low maintenance requirement. 16% Solids.

Advantages

• The quick drying, self-levelling characteristics of RESULTS are enhanced by its high resistance to scuffs and black heel marks.
• The combination of the finest acrylic polymers, resins, and waxes available form a durable, non yellowing, non darkening, glossy finish.
• Recommended for use on vinyl, vinyl composition, vinyl asbestos, asphalt tile, and linoleum. Also use on sealed floors of wood, concrete, terrazzo and the so-called no wax-floors.
• COVERAGE: 1500-2000 sq. ft. per gallon DRYING TIME: 20-30 minutes

Directions

• Read the entire label before using this product.
• INITIAL APPLICATION:
  • 1. Completely strip old floor finish using Mop On or Re-Move Floor Finish Stripper.
  • 2. Remove stripping solution and rinse floor thoroughly (2 rinses recommended). Allow to dry.
  • 3. Using a clean applicator of choice, apply thin, uniform coat of Results Floor Finish. Allow each coat to dry thoroughly (normal conditions 20 to 30 minutes). 2 to 4 coats of finish are recommended.
• ROUTINE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Damp mop or automatic scrub using Maintain Neutral pH Floor Cleaner.
  • 3. Traffic lanes may be recoated as necessary.
  • 4. Buff or burnish the floor as desired. The use of lustre plus One Step Cleaner/Gloss Enhancer is recommended to condition the floor and extend the time between top scrub and recoating.
• RESTORATIVE MAINTENANCE:
  • 1. Dust mop or sweep floor.
  • 2. Top scrub the floor using APC All Purpose Cleaner at a ratio of 1 to 20 (6 ounces/gallon). Use aggressive enough floor pad to remove the top layer of floor finish.
  • 3. Rinse the floor, making sure it is clean and free of residue. Apply 2 to 4 coats of Results Floor Finish as directed above.

Caution

• KEEP OUT OF REACH OF CHILDREN

Specifications

• Physical Form: Opaque Liquid
• Color: Off White
• Scent: Slight Ammonia
• Specific Gravity: 1.02
• Density: 8.5 lbs. per gallon
• pH As Is: 9.0 +- .3
• Total Solids: 16%
• Weight: 37.50 Pounds

Results Technical Data Sheet

Results Safety Data Sheet

Warning- ATTENTION CALIFORNIA RESIDENTS - Cancer and Reproductive Harm-